Reference Guide

Table 501. --VmdNvmePcie1Cpu1 (continued)
Attribute Details Description
Enables or disables the VMD for Front NVMe Port (PCIE1-CPU1).
--VmdPcieSlot
Table 502. --VmdPcieSlot
Attribute Details Description
Valid Argument Auto, Disabled
Enables or disables the VMD for the PCIe slot.
--WakeOnDock
Table 503. --WakeOnDock
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables waking the system when a docking connection is made.
--WakeonLAN
Table 504. --WakeonLAN
Attribute Details Description
Valid Argument LanOnly, Disabled, AddInCard, OnBoard, WlanOnly, LanWlan, LanWithPxeBoot, Sfp, LanSfp,
SfpWithPxeBoot
Defines the wake-on-LAN feature.
● LanOnly — The system wake-on-LAN feature is enabled. Either an onboard or an add-in
NIC can wake the system up.
● Disabled — The system does not respond to magic packets or other means of wake-on-
LAN. The NIC chip section that looks for packets will not be powered.
● AddInCard — Enables NICs, plugged into the special power connector, as the source of
any wake-on-LAN signal.
● OnBoard — The onboard NIC is enabled for wake-on-LAN.
● WlanOnly — Enables wake-on-LAN for wireless.
● LanWlan — On systems that have onboard LAN and wireless LAN hardware, enables wake
on either wired or wireless LAN.
● LanWithPxeBoot — Enables the network controller and causes the system to wake up
and immediately boot to PXE when a wake packet is sent to the system in the S4 or S5
state.
● SfpNic — Allows the system to wake-up by special SFP signals.
● LanOrSfpNic — Allows the system to wake-up either by LAN, or by SFP signals.
● SfpNicWithPxeBoot — Allows the system to wake-up by SFP singnals, and immediately
boot to PXE.
Example
C:\>cctk --WakeOnLan=LanWithPxeBoot
WakeOnLan=LanWithPxeBoot
Options for Dell Command | Configure 4.2 131