Reference Guide

Table 431. --UefiBootPathSecurity (continued)
Attribute Details Description
● Never — The Admin password is not required for booting from UEFI boot paths.
--CapsuleFirmwareUpdate
Table 432. --CapsuleFirmwareUpdate
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables BIOS updates via UEFI capsule update packages.
NOTE: Disabling this option blocks the BIOS updates from services such as Microsoft
Windows Update and Linux Vendor Firmware Service (LVFS).
--UefiNwStack
Table 433. --UefiNwStack
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the UEFI network protocols that allow the usage of network card in a
preinstallation environment.
--UniversalConnect
Table 434. --UniversalConnect
Attribute Details Description
Valid Argument Enabled, Disabled
Allows or denies Windows 95 from re-enumerating when a new dock device is attached to the
system.
● Enabled — Denies Windows 95 from re-enumerating when a new dock device is attached
to the system.
● Disabled — Allows Windows 95 from re-enumerating when a new dock device is attached
to the system.
Example
C:\>cctk --UniversalConnect=Enabled
UniversalConnect=Enabled
--UnobtrusiveMode
Table 435. --UnobtrusiveMode
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the hotkey Fn + B. When enabled, pressing Fn + B turns off the light
and sound emissions of the fans and wireless radios in the system. To resume normal
operations, press Fn + B again.
118 Options for Dell Command | Configure 4.2