Reference Guide

--TrustExecution
Table 427. --TrustExecution
Attribute Details Description
Valid Argument Enabled, Disabled
Sets the Intel Trusted Execution Technology.
--TurboMode
Table 428. --TurboMode
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables single core-based turbo mode. When enabled, Intel Turbo Boost Technology
allows processor(s) to run at frequencies higher than the advertised frequency.
--TypeCPower
Table 429. --TypeCPower
Attribute Details Description
Valid Argument 7.5W, 15W
Configures the maximum power (in Watts) for type-C connector.
--UartPowerDown
Table 430. --UartPowerDown
Attribute Details Description
Valid Argument Enabled, Disabled
Enables the operating system to power down Universal Asynchronous Receiver/Transmitter
(UART) or disables the operating system from powering down UART.
--UefiBootPathSecurity
Table 431. --UefiBootPathSecurity
Attribute Details Description
Valid Argument AlwaysExceptInternalHddPxe, AlwaysExceptInternalHdd, Always, and Never
Determines whether the system should prompt the user to enter the Admin password, if set,
while booting from a UEFI boot path from the F12 Boot Menu.
● AlwaysExceptInternalHddPxe - UefiBootPathSecurity determines whether tor not the
system must prompt you to enter the Admin password. This occurs when the
UefiBootPathSecurity is set while booting from a UEFI boot path (from the F12 Boot
Menu).
● AlwaysExceptInternalHdd — All UEFI boot paths require the user to enter the Admin
password, except for the boot paths that are hosted on an internal hard disk drives.
● Always — Booting from any UEFI boot path requires the user to enter the Admin
password.
Options for Dell Command | Configure 4.2 117