Reference Guide

--SnoopFilter
Table 385. --SnoopFilter
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the snoop filter option from the system BIOS.
--InternalSpeaker
Table 386. --InternalSpeaker
Attribute Details Description
Valid Argument Enabled, Disabled, Low, Medium, High
Description
Turns the built-in speakers on or off.
● Enabled — turns on the built-in speaker. The speaker is enabled at the single system-
supported volume.
NOTE: This should be used only if low/medium/high attributes are not supported by
the system.
● Disabled — turns off the built-in speaker.
● Low — Sets the volume of the built-in speaker to low.
● Medium — Sets the volume of the built-in speakers to medium.
● High — Sets the volume of the built-in speakers to high.
--SpeakersStealthMode
Table 387. --SpeakersStealthMode
Attribute Details Description
Valid Argument Unchanged, TurnOff
Configures the state of the onboard speakers depending on the Stealth mode is enabled or
disabled.
● TurnOff — Turns off the onboard speakers if the stealth mode is enabled.
● Unchanged — Retains the current state of the onboard speakers.
--Speedstep
Table 388. --Speedstep
Attribute Details Description
Valid Argument Enabled, Disabled, MaxPerformance, MaxBattery
Sets the speedstep status to Enabled, Disabled, MaxPerformance, or MaxBattery.
--SpeedShift
Table 389. --SpeedShift
Attribute Details Description
Valid Argument Enabled, Disabled
108 Options for Dell Command | Configure 4.2