Release Notes

Fix: Dell Command | Configure SCE stops responding once you enter " in any of the following fields: Passwords, Asset, or

PropOwntag issue has been resolved.

Fix: Dell Command | Configure stops responding on 19H1 operating system has been resolved.

Fix: Import .ini displays an 146 error code with KeyboardBacklightColor feature on nonsupported system, this issue has been

resolved.

Fix: Removing HAPI install from WinPE scripts.

Fix: The set operation failure message for SHA256 BIOS feature has been resolved.

NOTE: No escape sequence is required in user interface for text field features.

Importance

RECOMMENDED: Dell recommends applying this update during your next scheduled update cycle. The update contains feature

enhancements or changes that will help keep your system software current and compatible with other system modules

(firmware, BIOS, drivers, and software).

Known Issues: Command Line Interface

Issue: Unable to use Dell Command | Configure after reinstallation/upgrade.

Description: Dell command | Configure may not work after reinstallation/upgrade on Ubuntu Desktop 16.04 because dcdbus

module may not be loaded during reinstallation.

Resolution: Load the module by running the following command:

insmod <filename>

Issue: Windows 7 does not recognize the digital signature validity.

Description: If the system is not connected to Internet, Windows 7 does not recognize the digital signature validity of Dell

Command | Configure installation file.

Resolution: Connect the system to Internet, and validate the digital signature.

Issue: Do not use the infile or outfile options in the .ini file.

Issue: Dell Command | Configure supports only single-byte characters for asset set operation.

Resolution: If the user has a different locale, change the keyboard layout to English before using the asset option.

Issue: TPM-related tokens can be modified independently.

Description: Dell Command | Configure does not control the dependencies among the various TPM PPI options. For example, it

is possible to change the TPM PPI ACPI option through Dell Command | Configure even when TPM is not On.

NOTE: There is no negative impact due to this on the BIOS.

Issue: Dependent options are not working as configured in UEFI mode for Legacy Option ROM and Secure Boot.

Description:

● Dell Command | Configure allows enabling Legacy Option ROM when Secure Boot is On.

● Dell Command | Configure allows disabling Legacy Option ROM when Boot mode is Legacy.

● Dell Command | Configure allows enabling Secure Boot when Legacy option ROM is enabled and boot mode is UEFI.

● Dell Command | Configure does not allow enumerating Secure Boot when it is disabled.

NOTE: There is no negative impact due to this on the BIOS. This issue is addressed in the upcoming BIOS versions.

Issue: Blinkpsu1led and Blinkpsu2led missing in the .ini file or SCE.

Description: Blinkpsu1led and Blinkpsu2led will not be present in the .ini file or SCE as they are enable-only tokens and they are

active only for few seconds. These tokens cannot be modified using user interface.

Issue: advsm option displays the status as Other

Description: If any of the fans is not working, the advsm option displays the status as Other.

Release type and Definition