Reference Guide

--PowerOnLidOpen
Table 330. --PowerOnLidOpen
Attribute Details Description
Valid Argument Enabled, Disabled
Set the PowerOnLidOpen feature using the following options:
• Enabled - If the feature is set to enabled, the system powers up from the off state whenever the
lid is opened. This system powers on when powered either by the AC adapter or the system
battery.
• Disabled - If this feature is set to disabled, the system does not power up from the off state
whenever the lid is opened.
--PowerLogClear
Table 331. --PowerLogClear
Attribute Details Description
Valid Argument Enabled, Disabled
Prevents or allows the power event log to be cleared on the next boot.
• Enabled — Clears the power event log on the next boot.
• Disabled — Does not clear the power event log on the next boot.
--PowerMgmt
Table 332. --PowerMgmt
Attribute Details Description
Valid Argument Disabled, Minimum, Regular, Maximum
Sets the power management settings.
--PwrOffWlanStealthMode
Table 333. --PwrOffWlanStealthMode
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the poweroffintel8260stealthmode feature.
NOTE: Disabling Stealth Mode does not automatically restore the power or functionality
of the card until the next complete boot. This nonstandard mode is available as an
option for Stealth Mode control of the Intel 8260 card for the following use cases: Pre-
boot applications, Linux OS, or Windows OS without Dell recommended drivers.
• Enabled — Disconnects power from the Intel 8260 Wireless NIC when the Stealth Mode is
enabled.
• Disabled — Does not disconnect power from the Intel 8260 Wireless NIC when the Stealth Mode
is enabled.
94 Options for Dell Command | Configure 4.3