Reference Guide

Attribute Details Description

Enables or disables Peak Shift battery configuration. Using Peak Shift configuration, you can minimize

the consumption of AC power during the peak power usage period of the day with the enable and

disable options. You can set a start and end time for the Peak Shift period. During this period, the

system runs on battery if the battery charge is above the set battery threshold value. After the Peak

Shift period, the system runs on AC power without charging the battery. The system functions

normally using AC power and recharging the battery after the specified Charge Start Time.

NOTE: To use PeakShiftCfg, set the values of Operate only on battery, Operate

only on AC, and Resume normal power/charge. The values must be set in such a

way that Peak shift start time <= Peak shift end time <= Peak shift charge start time.

NOTE: The value of hour must be in the range 00–23 and minute must be 00,15, 30, or

45. To set 12 a.m., provide the hour value as 00.

Example

To enable Peak Shift battery configuration:

C:\>cctk --PeakShiftCfg=Enabled

PeakShiftCfg=Enabled

To enable Peak Shift battery configuration on specific days for a specific period:

C:\>cctk --

PeakShiftCfg=Enabled,mon-10:30/14:00/16:00,tue-10:30/14:00/16:30

To disable Peak Shift battery configuration:

C:\>cctk --PeakShiftCfg=Disabled

PeakShiftCfg=Disabled

--PenMisIndication

Table 322. --PenMisIndication

Attribute Details Description

Valid Argument Enabled, Disabled

Enables or disables the missing pen indication. This controls tablet PC pen removal. The pen LED blinks

to indicate that the pen has been removed from the retaining well.

--PenResumeOn

Table 323. --PenResumeOn

Attribute Details Description

Valid Argument Enabled, Disabled

Enables or disables the resume on pen setting.

--PntDevice

Table 324. --PntDevice

Attribute Details Description

Valid Argument SerialMouse, Ps2Mouse, Touchpad, SwitchToExternalPs2

Sets the pointing device.

• SerialMouse — Sets the pointing device to external serial only.

92 Options for Dell Command | Configure 4.3