Reference Guide

Attribute Details Description
Enables or disables Preboot Execution Environment (PXE) as the first boot device on all subsequent
boots.
--ForcePxeOnNextBoot
Table 175. --ForcePxeOnNextBoot
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables Force PXE on next boot in BIOS.
If enabled, when the BIOS boots next time, the first PXE-capable device is inserted as the first device
in the boot sequence. Enabling this value causes this operation on the next boot only, and does not
cause a change in the defined boot sequence of the system. The BIOS chooses the first PXE-capable
device as the onboard network controller of the system, if present and enabled, or the first bootable
network device found in the standard PCI search order of the system, whichever comes first.
If disabled, the boot override feature is disabled and the system boot sequence is in effect.
--FrontPanelErrDisplayMode
Table 176. --FrontPanelErrDisplayMode
Attribute Details Description
Valid Argument AllErr, FirstErr
Configures to report all the errors or only the first error on the front panel Liquid Crystal Display (LCD).
• AllErr — All errors displayed on front panel LCD.
• FirstErr — Only first error displayed on front panel LCD.
--FrontBezelLEDIntensity
Table 177. --FrontBezelLEDIntensity
Attribute Details Description
Valid Argument Disabled, Low, Medium, and Full
Controls the light intensity of the LED which is there in the front bezel.
--FrontFan
Table 178. --FrontFan
Attribute Details Description
Valid Argument Enabled, Disabled
Sets the value to the FrontFan by using the following options:
• Enabled—When enabled, the front fan utilizes the thermal solution of the system.
• Disabled—When disabled, thermal solution of the system utilizes only the fan from the back
panel.
62 Options for Dell Command | Configure 4.3