Reference Guide

--DynamicWirelessTransmitPower
Table 133. --DynamicWirelessTransmitPower
Attribute Details Description
Valid Argument Enabled, Disabled
When enabled, the system increases the power transmission capability of the WLAN device. This
improves the performance in the system configuration within the regulatory validated guidelines.
--DynTunML
Table 134. --DynTunML
Attribute Details Description
Valid Argument Enabled, Disabled
Enables operating system capability to enhance dynamic power tuning capabilities based on detected
workloads.
Protections for exposure: The –Admin password restricts editing the command –Removed in case
when you are using command-line interface.
--EmbIdeRaid
Table 135. --EmbIdeRaid
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the embedded Integrated Development Environment (IDE) Redundant Array of
Independent Disks (RAID) controller.
--EmbIdeRaid2
Table 136. --EmbIdeRaid2
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the second embeded IDE RAID controller.
--EmbNic1
Table 137. --EmbNic1
Attribute Details Description
Valid Argument EnabledPxe, Enabled, Disabled, OnWithIscsi, OnWithRplBoot, OnWithImageServerBoot
Defines the state of the built-in NIC.
NOTE: Onwithimageserverboot is used in the deployment of Dell SmartClient products.
54 Options for Dell Command | Configure 4.3