Reference Guide

--DeepSleepCtrl
Table 112. --DeepSleepCtrl
Attribute Details Description
Valid Argument S5Only, S4AndS5, Disabled
Configures the system power mode when the system is in s4 and s5 state. If set to S5Only, the
system moves to the lowest-power off mode when in s5 state. If set to S4AndS5 state, the system
moves to the lowest-power off mode when in s4 and s5 states. When the system is in a low-power
mode, it turns off most of the power-consuming circuitry devices, to meet the 1 W power limit. It
disables the Power Management Event (PME), USB power, and so on.
--DisGpuExtDisplay
Table 113. --DisGpuExtDisplay
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the platform external displays.
NOTE: Embedded Display Port (eDP) will be enabled by Integrated Graphics Processing Unit
(iGPU).
• Enabled — Allows discrete Graphics Processing Unit (dGPU) to enable the platform external displays
such as HDMI, NB DP, Type-C, and so on with the purpose of enabling discrete graphic features such
as Eyefinity, Mosaic, 10bit DP displays, etc..
• Disabled — The normal hybrid graphics mode is enabled.
NOTE: This feature is used in hybrid graphics mode only.
--DisableDockDevicesexceptVideo
Table 114. --DeepSleepCtrl
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables all the non-video devices (serial, audio, LAN, and USB ports) on a rugged dock.
--DisBluetoothRadio
Table 115. --DisBluetoothRadio
Attribute Details Description
Valid Argument Enabled, Disabled
Bluetooth radio stops functioning when stealth mode is enabled.
--DisGPSReceiver
Table 116. --DisGPSReceiver
Attribute Details Description
Valid Argument Enabled, Disabled
GPS receiver stops functioning when stealth mode is enabled.
50 Options for Dell Command | Configure 4.3