Reference Guide

Attribute Details Description
Example With Sub Options
With the --BootListType=uefi option, you can specify the following sub options: --Sequence , --
EnableDevice , and --DisableDevice .
C:\>cctk Bootorder --BootListType=uefi
--sequence=hdd.1,floppy --enabledevice=
cdrom,hdd.2
C:\>cctk Bootorder --BootListType=uefi
--Sequence=hdd.1,Floppy --EnableDevice=
cdrom,hdd.2 --valsetuppwd=password
NOTE: If BootListType option is not provided, then the default option is applied to the
settings of the Legacy Bootorder. Apply settings to UEFI Bootorder for non-Legacy
devices.
--DisableDevice
Table 80. --DisableDevice
Attribute Details Description
Disables the device.
Example
cctk BootOrder --BootListType=uefi --DisableDevice=hdd,embnicipv4,cdrom
cctk BootOrder --BootListType=legacy --DisableDevice=floppy,hdd,cdrom
cctk BootOrder --BootListType=uefi --EnabledDevice=hdd.* - It will
Enabled all Hard Disk of UEFI Bootorder
or
cctk BootOrder --BootListType=uefi --DisableDevice=4,7,2,1
cctk BootOrder --BootListType=legacy --DisableDevice=4,7,2,1
cctk BootOrder --BootListType=Legacy --DisableDevice=hdd.* - It will
Enabled all Hard Disk of Legacy Bootorder
--EnableDevice
Table 81. --EnableDevice
Attribute Details Description
Enables the device.
Example
cctk BootOrder --BootListType=uefi --EnableDevice=hdd,embnicipv4,cdrom
cctk BootOrder --BootListType=legacy --EnableDevice=floppy,hdd,cdrom
cctk BootOrder --BootListType=uefi --EnableDevice=hdd.* - It will
Enabled all Hard Disk of UEFI Bootorder
or
cctk BootOrder --BootListType=uefi --EnableDevice=4,7,2,1
cctk BootOrder --BootListType=legacy --EnableDevice=4,7,2,1
cctk BootOrder --BootListType=Legacy --EnableDevice=hdd.* - It will
Enabled all Hard Disk of Legacy Bootorder
42 Options for Dell Command | Configure 4.3