Reference Guide

--AutoOn
Table 50. --AutoOn
Attribute Details Description
Valid Argument Disabled, Weekdays , Everyday, Selectdays
Configures the auto on option for a system. Using this option you can configure the days on which the
system has to turn on automatically.
• Disabled — Disables the auto on function on the system.
• Everyday — Enables the auto on function on every day of the week.
• Weekdays — Enables the auto on function on week days.
• SelectDays — Enables the auto on function on selected days of the week. The system disables
the auto on function on the days that are not selected.
Example
C:\>cctk --AutoOn=Disabled
AutoOn=Disabled
C:\>cctk --AutoOn=SelectDays:Mon,
TueAutoOn=SelectDays:Mon, Tue
--AutoOnHr
Table 51. --AutoOnHr
Attribute Details Description
Valid Argument integers ranging from 0 to 23
Sets the auto on configuration in hours.
Example
C:\>cctk --AutoOnHr=5
AutoOnHr=5
--AutoOnMn
Table 52. --AutoOnMn
Attribute Details Description
Valid Argument integers ranging from 0 to 59
Sets the auto on configuration in minutes.
Example
C:\>cctk --AutoOnMn=30
AutoOnMn=30
--AutoOnPeriod
Table 53. --AutoOnPeriod
Attribute Details Description
Valid Argument integers ranging from 0 to 254
Defines the time after which the system should automatically wake up from Standby, Hibernate, or
Switched off mode.
34 Options for Dell Command | Configure 4.3