Reference Guide

--Asset
Table 45. --Asset
Attribute Details Description
Valid Argument <string>
Displays or sets the customer-programmable asset tag number for a system. The maximum length of
an asset tag is 10 characters. Asset tag values should not contain any spaces.
--AssignIntr
Table 46. --AssignIntr
Attribute Details Description
Valid Argument Standard, Distributed
This option controls the interrupted assignment of PCI devices in the system. This option is set to
standard by default, causing standard interrupt routing that uses INTA, B, C, D for all PCIe devices.
When set to distributed, the interrupt routing is rerouted at the MCH root ports to minimize sharing of
interrupts across all PCIe (and PCI-X in PIC mode) devices.
--AtgSystem
Table 47. --AtgSystem
Attribute Details Description
Valid Argument Enabled, Disabled
Sets or removes the Complementary Metal Oxide Semiconductor (CMOS) bit to indicate whether the
system uses an All Terrain Gear (ATG) base or not.
--AttemptLegacyBoot
Table 48. --AttemptLegacyBoot
Attribute Details Description
Valid Argument Enabled, Disabled
Determines if BIOS should attempt to boot from the legacy boot list when the UEFI boot list fails.
• Enabled — If the UEFI boot list fails, then BIOS attempts to boot from the Legacy boot list.
• Disabled — BIOS discontinues the booting process if the UEFI boot list fails.
--AudioMode
Table 49. --AudioMode
Attribute Details Description
Valid Argument Disabled, HalfDuplex, FullDuplex
Sets the audio mode to any of the following values:
• Disabled — Completely releases the onboard hardware resources.
• HalfDuplex — Allows only record or playback at a time.
• FullDuplex — Allows record and playback simultaneously.
Options for Dell Command | Configure 4.3 33