Reference Guide

Attribute Details Description
Set the Intel Active Management Technology (AMT) capability using the following options:
• Enabled - If Intel Active Management Technology is enabled, MEBx is available through F12 menu
and you can provision AMT. MEBx may not be not accessible if OROM Keyboard Access is
disabled.
• Restrict MEBx Access - If Intel Active Management Technology is enabled, MEBx is not available
in pre-boot but you can provision AMT from OS.
• Disabled - If Intel Active Management Technology is disabled, MEBx is not available in pre-boot.
Once disabled, Intel Active Management Technology can only be enabled through the BIOS
interface. If the Intel AMT is already provisioned, AMT cannot be disabled. Un-provisioning AMT is
required to disable AMT.
--AntennaSwitch
Table 42. --AntennaSwitch
Attribute Details Description
Valid Argument AllInternal, WlanWwanExt, WlanGpsExt, WwanGpsExt, WlanExt, WwanExt, and GpsExt
This setting determines the antenna usage when the system is connected to a docking station. The
option designates which wireless radio is connected to which dock antenna. The System Antennas
Only option indicates the system antennas that are used, and the dock antennas that are not used,
even when the system is docked.
When the system is undocked, the system antennas are used and this setting has no effect. Ant A
indicates dock antenna A, and Ant B indicates dock antenna B.
NOTE: This setting applies to rugged docking stations and does not apply to USB Type-C
docking stations.
--AsfMode
Table 43. --AsfMode
Attribute Details Description
Valid Argument On, Off, AlertOnly, Dash
Sets the alert standard format.
• On — Turns the ASF mode on.
• Off — Turns the ASF mode off.
• AlertOnly — Enables only error messages.
• Dash — Enables LOM to have both DASH and ASF 2.0 functionality.
--Aspm
Table 44. --Aspm
Attribute Details Description
Valid Argument Auto, Disabled, L1
Set the Active State Power Management (ASPM) level.
• Auto — There is handshaking between the device and PCI Express hub to determine the best
ASPM mode supported by the device.
• Disabled — ASPM power management is turned off always.
• L1 — ASPM power management is set to use L1.
32 Options for Dell Command | Configure 4.3