Reference Guide

Attribute Details Description
• DacAndAdc - Sets the channel mode as DAC output, but can be monitored through ADC input.
• Gpio - Sets the channel mode as General Purpose Input or Output.
--AdjCachePrefetch
Table 25. --AdjCachePrefetch
Attribute details Description
Valid Argument Enabled, Disabled
Enables or disables the adjacent cache line prefetch.
• Enabled — The processor fetches the cache line containing the currently requested data, and
pre-fetches the following cache line.
• Disabled —The processor fetches only the cache line containing the currently requested data.
--AdminSetupLockout
Table 26. --AdminSetupLockout
Attribute Details Description
Valid Argument
Enabled, Disabled
Enables or disables the admin setup lockout.
• Enabled — If administrator password is set for the system, user can view the setup screens only
after entering the correct administrator password. If administrator password is not set, user can
view the setup screens.
• Disabled — User can view the Setup screens without entering administrator password even if the
administrator password is set in the system.
--AdvBatteryChargeCfg
Table 27. --AdvBatteryChargeCfg
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the Advanced Battery charge mode. Advanced Battery charge mode uses standard
charging algorithm and other methods during non-working hours to maximize battery health. During
working hours, express charge is used to charge the batteries faster. You can configure the days and
the time period during which the battery has to be charged. To enable advanced battery charging,
provide the day, start time, and the duration of charging (peak usage duration).
NOTE: The value of hour must be in the range 00–23 and minute must be 00,15, 30, or
45.
Example
To enable the advanced battery charging mode:
C:\>cctk --AdvBatteryChargeCfg=Enabled
AdvBatteryChargeCfg=Enabled
To enable the advanced battery charging mode on specific days for a specific period:
C:\>cctk --
AdvBatteryChargeCfg=Enabled,mon-10:00/08:00,tue-13:45/06:00
28 Options for Dell Command | Configure 4.3