Reference Guide

Options for Dell Command | Configure 4.3
This section provides an overview of the Dell Command | Configure options. It describes the general and BIOS options to configure
settings for the client systems.
Dell Command | Configure options can be divided into:
• General options—Applicable to all systems.
• BIOS options—Applicable only if the BIOS of the system supports.
NOTE: If you are running Dell Command | Configure commands on systems running Windows 7 or later, run the
commands with the administrator rights. Running the command displays a appear window where you can enter the
administrator ID and password.
NOTE: If you run Dell Command | Configure commands on systems running Windows 7 or later without administrator
rights, the following error message is displayed: 'admin/root' privileges required to execute this
application.
Topics:
• General options
• BIOS options
• Advanced System Management
• PCI reporting
• Completion code
General options
The following are the general options of Dell Command | Configure .
NOTE:
Some of the options in Dell Command | Configure are followed by an asterisk. These options do not accept any
suboptions or arguments. The values associated with these options are reported by the Basic Input Output System
(BIOS). You cannot modify these values.
-H or --Help
Table 5. -H or --Help
Attribute Details Description
Valid Argument none or <valid option name>
Without an argument, this option displays general usage information for the utility. If the argument
matches a valid option, the usage information of the option is displayed. If the option has arguments,
the arguments are displayed, separated by a | character. If the argument is supported on the system, a
+ symbol is displayed with the argument. If the option has suboptions, all suboptions, valid arguments,
and a description are listed. If the argument does not match a valid option, a usage error is given (and
usage information is displayed).
Example
C:\>cctk -H asfmode
asfmode: Sets the asf (alert standard format)mode. DASH and ASF 2.0
set enables LOM to have DASH and ASF 2.0 functionality.
Arguments: off+ | on+ | alertonly+
3
Options for Dell Command | Configure 4.3 21