Reference Guide

Setting the non-critical threshold values
Sets the non-critical threshold values for a given probe. It is possible to set upper non critical threshold values for Voltage, Current,
Temperature and cooling device probes
To set the non-critical threshold values for a probe, type:
cctk Advsm --Set=<cctk option name>:<upper non critical threshold value>
NOTE: Here, cctk option name is the component for which you want to set the non-critical threshold values in a
probe. You can obtain the cctk option name for a probe using the report command. Refer User’s Guide for more
information.
For example, to set the non-critical threshold values for a voltage probe, type:
cctk Advsm --Set=Voltage_1:10
For example, to set only the upper non-critical threshold value for a current probe, type:
cctk Advsm --Set=Current_1:100
For example, to set the non-critical threshold values for a cooling probe, type:
cctk Advsm --Set=Cd_1:10
For example, to set only the upper non-critical threshold value for a temperature probe, type:
cctk Advsm --Set=Temperature_1:100
If the system has a setup password, while setting the non-critical threshold values specify the setup password and set the non-critical
threshold values as:
cctk Advsm --Set=<option name>:<upper non critical threshold value> --ValSetupPwd= <setup
password>
For example, to set the non-critical threshold values for a voltage probe on a system with a setup password, type:
cctk Advsm --Set=Voltage_1:10 --ValSetupPwd= <setup password>
For example, to set the non-critical threshold values for a current probe on a system with a setup password, type:
cctk Advsm --Set=Current_1:55 --ValSetupPwd = <setup password>
For example, to set the non-critical threshold values for a cooling probe on a system with a setup password, type:
cctk Advsm --Set=Cd_1:55 --ValSetupPwd = <setup password>
For example, to set the non-critical threshold values for a temperature probe on a system with a setup password, type:
cctk Advsm --Set=Temperature_1:55 --ValSetupPwd = <setup password>
If the system has a system password and no setup password, while setting the non-critical threshold values specify the system password
and set the non-critical threshold values as:
cctk Advsm --Set=<cctk option name>:<upper non critical threshold value> --ValSysPwd= <system
password>
For example, to set the non-critical threshold values for a voltage probe on a system with a system password and no setup password,
type:
cctk Advsm --Set=Voltage_1:10 --ValSysPwd = <system password>
140
Options for Dell Command | Configure 4.3