Reference Guide

--VmdPcieSlot
Table 520. --VmdPcieSlot
Attribute Details Description
Valid Argument Auto, Disabled
Enables or disables the VMD for the PCIe slot.
--WakeOnAc
Table 521. --WakeOnAc
Attribute Details Description
Valid Argument Enabled, Disabled
Sets the behavior of the system after AC power is lost.
• Enabled—When AC power is restored, the system turns on.
• Disabled—When AC power is restored, the system remains turned off.
--WakeOnDock
Table 522. --WakeOnDock
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables waking the system when a docking connection is made.
--WakeonLAN
Table 523. --WakeonLAN
Attribute Details Description
Valid Argument LanOnly, Disabled, AddInCard, OnBoard, WlanOnly, LanWlan, LanWithPxeBoot, Sfp, LanSfp,
SfpWithPxeBoot
Defines the wake-on-LAN feature.
• LanOnly — The system wake-on-LAN feature is enabled. Either an onboard or an add-in NIC can
wake the system up.
• Disabled — The system does not respond to magic packets or other means of wake-on-LAN. The
NIC chip section that looks for packets will not be powered.
• AddInCard — Enables NICs, plugged into the special power connector, as the source of any
wake-on-LAN signal.
• OnBoard — The onboard NIC is enabled for wake-on-LAN.
• WlanOnly — Enables wake-on-LAN for wireless.
• LanWlan — On systems that have onboard LAN and wireless LAN hardware, enables wake on
either wired or wireless LAN.
• LanWithPxeBoot — Enables the network controller and causes the system to wake up and
immediately boot to PXE when a wake packet is sent to the system in the S4 or S5 state.
• SfpNic — Allows the system to wake-up by special SFP signals.
• LanOrSfpNic — Allows the system to wake-up either by LAN, or by SFP signals.
• SfpNicWithPxeBoot — Allows the system to wake-up by SFP singnals, and immediately boot to
PXE.
132 Options for Dell Command | Configure 4.3