Reference Guide

--StandbyState
Table 406. --StandbyState
Attribute Details Description
Valid Argument S1, S3
Sets the system to ACPI S1 or S3 sleeping state when the systems enters standby mode.
--StealthMode
Table 407. --StealthMode
Attribute Details Description
Valid Argument Enabled, Disabled
Configures the Dell Stealth Mode features. Sets the operation mode of the system elements. If
enabled, the system operates in the preprogrammed stealth mode. If disabled, the system operates in
the normal mode. For example,
• If stealth mode is enabled and the device is set to TurnOff, then you can press Fn+F7 keys to turn
the device off.
• If the stealth mode is enabled and the device stealth mode is set to Unchanged, then the device
retains its status and remains unchanged while pressing Fn+F7 keys.
• If the stealth mode is disabled, then the state of the device cannot be changed by the individual
device stealth modes.
Following are the system elements that have effect of stealth mode on them:
• DisOnboardLEDs
• DisOnboardLCDScreen
• DisOnboardSpeakers
• DisOnboardFans
• DisBluetoothRadio
• DisGPSReceiver
• DisWLANRadio
• DisWWANRadio
• DisOnboardLEDs
--StrongPassword
Table 408. --StrongPassword
Attribute Details Description
Valid Argument Enabled, Disabled
Enables to enforce a strong password.
--SupportAssistOSRecovery
Table 409. --SupportAssistOSRecovery
Attribute Details Description
Valid Arguments Enabled, Disabled
Enables or disables the boot flow for SupportAssist OS recovery tool during certain system errors.
110 Options for Dell Command | Configure 4.3