Reference Guide

--InternalSpeaker
Table 401. --InternalSpeaker
Attribute Details Description
Valid Argument Enabled, Disabled, Low, Medium, High
Description
Turns the built-in speakers on or off.
• Enabled — turns on the built-in speaker. The speaker is enabled at the single system-supported
volume.
NOTE: This should be used only if low/medium/high attributes are not supported by
the system.
• Disabled — turns off the built-in speaker.
• Low — Sets the volume of the built-in speaker to low.
• Medium — Sets the volume of the built-in speakers to medium.
• High — Sets the volume of the built-in speakers to high.
--Speedstep
Table 402. --Speedstep
Attribute Details Description
Valid Argument Enabled, Disabled, MaxPerformance, MaxBattery
Sets the speedstep status to Enabled, Disabled, MaxPerformance, or MaxBattery.
--SpeedShift
Table 403. --SpeedShift
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the Intel Speed Shift Technology support. Setting this option to Enabled allows the
operating system to select the appropriate processor performance automatically.
--SplashScreen
Table 404. --SplashScreen
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the display of the splash or summary screen, rather than the detail of the POST
flow.
--Sriov
Table 405. --Sriov
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables BIOS support for Single Root I/O Virtualization (SR-IOV) devices.
Options for Dell Command | Configure 4.3 109