Install Guide

Creating a Windows PE 4.0 64-bit image

1. Browse to C:\Program Files (x86)\Dell\Command Configure\X86_64.

2. Open the command prompt with administrator privileges.

3. Run the following command: cctk_x86_64_winpe_4.bat C:\winpe_x86_64 C:\Progra~2\Dell\Comman~1.

NOTE: Ensure that the path that is used in the command is that of the Dell Command | Configure folder.

4. Browse to C:\winpe_x86_64\wim and copy the ISO image.

Creating a Windows PE 4.0 32-bit image

1. Browse to C:\Program Files\Dell\Command Configure\X86.

2. Open the command prompt with administrator privileges.

3. Run the following command: cctk_x86_winpe_4.bat C:\winpe_x86 C:\Progra~1\Dell\Comman~1.

NOTE: Ensure that the path that is used in the command is that of the Dell Command | Configure folder.

4. Browse to C:\winpe_x86\WIM and copy the ISO image.

Creating a bootable image preinstallation

environment using Windows PE 2.0 and 3.0

1. From the Microsoft website, download and install Windows AIK.

2. From dell.com/support, download and install Dell Command | Configure.

3. Download and install Dell Command | Configure.

4. Integrate the Dell Command | Configure directory structure into an ISO file (for Windows PE 2.0 and 3.0) to create a bootable ISO

image.

Related Links:

• Integrating Dell Command | Configure directory structure to an ISO file using Windows PE 3.0

• Integrating Dell Command | Configure directory structure in a WIM file using Windows PE 2.0

Integrating Dell Command | Configure directory structure

into an ISO file using Windows PE 3.0

Dell Command | Configure provides the cctk_x86_winpe_3.bat and cctk_x86_64_winpe_3.bat scripts that are needed to integrate

Dell Command | Configure . To integrate the Dell Command | Configure directory structure into an ISO file:

1. Browse to the directory where the script is located.

NOTE:

By default, the script for 32-bit systems is located in the Command Configure\x86 directory. The script for

64-bit systems is located in the Command Configure\x86_64 directory.

2. If you have installed AIK in a nondefault directory, open the script, set the AIKTOOLS path, and save the file.

For example, Set AIKTOOLS=C:\WINAIK\Tools.

3. Run the script with the path where you want to create the ISO file and the Dell Command | Configure installation directory as two

arguments.

NOTE: Ensure that the directory that is specified for the ISO image is not an existing directory.

• For a 32-bit system, run cctk_x86_winpe_3.bat C:\winPE_x86 C:\Progra~1\Dell\Comman~1.

• For a 64-bit system, run cctk_x86_64_winpe_3.bat C:\winPE_x86_64 C:\Progra~2\Dell\Comman~1.

NOTE: Ensure that the path that is used in the command is that of the Command Configure folder.

The ISO image and the WIM file are created in the following folder.

• For a 32-bit system; C:\winPE_x86\WIM

• For a 64-bit system; C:\winPE_x86_64\WIM

Dell Command | Configure 4.3 for Windows Preinstallation Environment