Reference Guide

--Lpt
Table 240. --Lpt
Attribute Details Description
Valid Argument Lpt1, Lpt2, Lpt3
Denes the parallel port conguration. Lpt1 enables the built-in parallel port of the system to operate in
Lpt1 mode, using Input/Output (I/O) address 378. Lpt2 enables the system’s built-in parallel port to
operate in Lpt2 mode, using I/O address 278. Lpt3 enables the built-in parallel port to operate in Lpt3
mode, using I/O address 3BC.
--LptMode
Table 241. --LptMode
Attribute Details Description
Valid Argument Disabled, At, Ps2, Ecp, Epp, EcpDma1, EcpDma3
Determines how the parallel ports operate. Set the parallel port to:
• Disabled — Disables the built-in parallel port of the system.
• At — Enables the built-in parallel port of the system to operate in AT mode (output-only).
• Ps2 — Enables the built-in parallel port of the system to operate in PS/2 mode (bi-directional).
• Ecp — Enables the built-in parallel port of the system to operate in Extended Capability Port (ECP)
mode, no DMA channel assigned.
• Epp — Enables the built-in parallel port to operate in Enhanced Parallel Port (EPP) mode.
• EcpDma1 — Enables the system’s built-in parallel port of the system to operate in ECP mode DMA
channel 1.
• EcpDma3 — Enables the built-in parallel port of the system to operate in ECP mode DMA channel
3.
Example
C:\>cctk --LptMode=At
LptMode=At
--M2PcieSsd0
Table 242. --M2PcieSsd0
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables M2 PCIE SSD 0.
Options for Dell Command | Congure 4.2 87