Reference Guide

--Camera
Table 89. --Camera
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the camera.
--CanBus
Table 90. --CanBus
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the Controller Area Network (CAN) Bus.
--ChasIntrusion
Table 91. --ChasIntrusion
Attribute Details Description
Valid Argument Enabled, Disabled, SilentEnable
Enables or disables the system to detect and report chassis intrusion events to the system display on
boot-up.
--ChassisIntruStatus
Table 92. --ChassisIntruStatus
Attribute Details Description
Valid Argument DoorOpen, Tripped, DoorClosed, TripReset
Displays the status of chassis intrusion. All the values are read-only except tripreset.
• DoorOpen — Indicates chassis door is opened.
• Tripped — Indicates the chassis door is opened since the last time the sensor detection logic was
reset.
• DoorClosed — Indicates chassis door is closed.
• TripReset — Resets the sensor detection logic to detect the next closed-to-open transition on the
chassis door.
Options for Dell Command | Congure 4.2 49