Reference Guide

Table Of Contents
Attribute Details Description
or
cctk BootOrder --BootListType=uefi --DisableDevice=4,7,2,1
cctk BootOrder --BootListType=legacy --DisableDevice=4,7,2,1
cctk BootOrder --BootListType=Legacy --DisableDevice=hdd.* - It will
Enabled all Hard Disk of Legacy Bootorder
--EnableDevice
Table 80. --EnableDevice
Attribute Details Description
Enables the device.
Example
cctk BootOrder --BootListType=uefi --EnableDevice=hdd,embnicipv4,cdrom
cctk BootOrder --BootListType=legacy --EnableDevice=floppy,hdd,cdrom
cctk BootOrder --BootListType=uefi --EnableDevice=hdd.* - It will
Enabled all Hard Disk of UEFI Bootorder
or
cctk BootOrder --BootListType=uefi --EnableDevice=4,7,2,1
cctk BootOrder --BootListType=legacy --EnableDevice=4,7,2,1
cctk BootOrder --BootListType=Legacy --EnableDevice=hdd.* - It will
Enabled all Hard Disk of Legacy Bootorder
--Sequence
Table 81. --Sequence
Attribute Details Description
Gets and Sets the Boot order sequence. The supported devices are hdd (hard disk), cdrom (CDROM),
oppy (Floppy Disk), usbdev (USB device), embnic (Embedded NIC), pcmcia (PCMCIA device), bev
(BEV device), and so on. For more information about the devices, see BootOrder.
Example
C:\>cctk BootOrder --Sequence=embnic,cdrom,hdd.1 --EnableDevice=floppy
--DisableDevice=cdrom
or
C:\>cctk BootOrder --Sequence=3,4,7,1 --EnableDevice=3,4 --
DisableDevice=7,1 (DeviceNumber)
or
UEFI Bootorder Sequence: BootOrder --BootListType=uefi --Sequence=hdd.*
or
BootOrder --BootListType=Legacy --Sequence=hdd.*
NOTE: * represents grouping of the shortform of the device types.
46 Options for Dell Command | Congure 4.2