Reference Guide

--AutoOSRecoveryThreshold
Table 51. --AutoOSRecoveryThreshold
Attribute Details Description
Valid Argument OFF, 1, 2, 3
Sets the threshold value for auto OS recovery. Controls the automatic boot ow for SupportAssist
System Resolution console and for Dell OS Recovery Tool. The system boots to the SupportAssist
System Resolution console and for Dell OS Recovery Tool if,
• the primary operating system fails to boot consecutively.
• the count of boot failure is greater than or equal to the value of the Auto OS Recovery threshold
setup option.
• SupportAssist OS Recovery option is enabled.
NOTE: If Auto OS Recovery threshold is set to OFF, then all automatic boot ow for
SupportAssist System Resolution console and for Dell OS Recovery Tool will be disabled.
--AutoOnPeriod
Table 52. --AutoOnPeriod
Attribute Details Description
Valid Argument integers ranging from 0 to 254
Denes the time after which the system should automatically wake up from Standby, Hibernate, or
Switched o mode.
NOTE: The system wakes up from Sleep, Hibernate, or Switched o mode only if the autoon
(AutoOn) option is enabled for everyday of the week.
--Camera2
Table 53. --Camera2
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the camera available at the back of the system.
• Enabled — Enables the camera available at the back of the system.
• Disabled — Disables the camera available at the back of the system.
Options for Dell Command | Congure 4.2 37