Reference Guide

--AddDevice
Table 15. --AddDevice
Attribute Details Description
Valid Argument Usb
Adds the specied device to the boot device list. At present, only the Universal Serial Bus (USB)
storage device is supported. This option is not valid on all the systems. The USB storage device is
added at the end of the boot order. If the USB storage device is already added in the boot order list, the
following message is displayed while executing the option:USB device is already present
in this machine.
NOTE: The AddDevice option is not supported on the systems with UEFI-based BIOS.
Example
C:\>cctk --AddDevice=Usb
--AdiModeChannel1
Table 16. --AdiModeChannel1
Attribute Details Description
Valid Argument Unused, AdcInput, DacOutput, DacAndAdc, Gpio
Sets the dened Analog/Digital Interface mode for channel 1.
• Unused - Channel is unused.
• AdcInput - Sets the channel mode as Analog-to-Digital Converter (ADC) input.
• DacOutput - Sets the channel mode as Digital-to-Analog Converter (DAC) output.
• DacAndAdc - Sets the channel mode as DAC output, but can be monitored through ADC input.
• Gpio - Sets the channel mode as General Purpose Input or Output.
--AdiModeChannel2
Table 17. --AdiModeChannel2
Attribute Details Description
Valid Argument Unused, AdcInput, DacOutput, DacAndAdc, Gpio
Sets the dened Analog/Digital Interface mode for channel 2.
• Unused - Channel is unused.
• AdcInput - Sets the channel mode as Analog-to-Digital Converter (ADC) input.
• DacOutput - Sets the channel mode as Digital-to-Analog Converter (DAC) output.
• DacAndAdc - Sets the channel mode as DAC output, but can be monitored through ADC input.
• Gpio - Sets the channel mode as General Purpose Input or Output.
26 Options for Dell Command | Congure 4.2