Reference Guide

--Absolute
Table 12. --Absolute
Attribute Details Description
Valid Argument Enabled, Disabled, and PermanentlyDisabled
Sets the value to the Absolute interface and control the Absolute service using the following options:
• Enabled - If enabled, then the Absolute service is activated or deactivated.
• Disabled - If disabled, then the Absolute service does not run.
• PermanentlyDisabled - If the Absolute interface is permanently disabled, then the Absolute feature
can be enabled by using the factory reset feature.
--AcPwrRcvry
Table 13. --AcPwrRcvry
Attribute Details Description
Valid Argument
o, last, on
Sets the behavior of the system after Alternating Current (AC) power is lost.
• O — When AC power is restored, the system remains turned o.
• On — When AC power is restored, the system turns on.
• Last — When the AC power is restored, the system returns to the state it was in when the power
was lost.
--ActivityLed
Table 14. --ActivityLed
Attribute Details Description
Valid Argument
ActLed, Wlan, Disabled
Sets the Network Activity Light Emitting Diode (LED) to any of the following:
• ActLed — Sets the Activity LED controlled by an Advanced Conguration and Power Interface
(ACPI) operating system and driver.
• Wlan — Sets the Activity LED as a wireless Local Area Network (LAN) radio on/o indicator.
• Disabled — Sets the Activity LED to o.
Options for Dell Command | Congure 4.2 25