Reference Guide

--UeBootPathSecurity
Table 431. --UeBootPathSecurity
Attribute Details Description
Valid Argument AlwaysExceptInternalHddPxe, AlwaysExceptInternalHdd, Always, and Never
Determines whether the system should prompt the user to enter the Admin password, if set, while
booting from a UEFI boot path from the F12 Boot Menu.
• AlwaysExceptInternalHddPxe - UeBootPathSecurity determines whether tor not the system must
prompt you to enter the Admin password. This occurs when the UeBootPathSecurity is set while
booting from a UEFI boot path (from the F12 Boot Menu).
• AlwaysExceptInternalHdd — All UEFI boot paths require the user to enter the Admin password,
except for the boot paths that are hosted on an internal hard disk drives.
• Always — Booting from any UEFI boot path requires the user to enter the Admin password.
• Never — The Admin password is not required for booting from UEFI boot paths.
--CapsuleFirmwareUpdate
Table 432. --CapsuleFirmwareUpdate
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables BIOS updates via UEFI capsule update packages.
NOTE: Disabling this option blocks the BIOS updates from services such as Microsoft
Windows Update and Linux Vendor Firmware Service (LVFS).
--UeNwStack
Table 433.
--UeNwStack
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the UEFI network protocols that allow the usage of network card in a preinstallation
environment.
--UniversalConnect
Table 434. --UniversalConnect
Attribute Details Description
Valid Argument Enabled, Disabled
Allows or denies Windows 95 from re-enumerating when a new dock device is attached to the system.
136 Options for Dell Command | Congure 4.2