Users Guide
• To provide a hard disk drive password, click Hard Disk Drive Password, then select the Use the password information below
option and type the hard disk drive password.
5 If the target system does not have a setup, system, or hard disk drive password, then select No password is required.
6 The following warning message By exporting this BIOS conguration, your system, setup and hdd passwords will no longer be
secure. If you would like to proceed with your passwords displayed in clear text, select Contonue. If you want to hide your
passwords, select Mask is displayed. Click MASK to protect your password, else click Continue.
7 Click OK..
NOTE: SCE can be generated on non WMI-ACPI system using multi-system package.
Exporting the conguration without setting values
To export asset and propowntag without specifying changes to values:
Select the Apply Settings check box of the corresponding option and export.
Target system conguration
You can apply the exported INI, CCTK, SCE, and shell script les to congure the target client systems.
Related Links:
• Applying a INI or CCTK le
• Applying a shell script on Linux systems
• Applying a SCE le
Applying INI or CCTK le
The prerequisites for applying INI le or CCTK le are as follows:
• Administrator privileges
• Dell Command | Congure installed on the client system
To apply INI le or CCTK le, run cctk -i <filename>.
NOTE
: For systems running Ubuntu Core operating system, copy the le at var/snap/dcc/current and run, dcc.cctk -i /var/
snap/dcc/current/<lename>.ini
Applying a shell script on Linux
1 Copy the script to a system running the Linux operation system.
2 Run dos2unix on the system.
3 Run the script as: sh <filename.sh>
Applying a SCE le
NOTE
: You must have Administrator privileges.
To apply SCE on a target system:
Double-click the SCE, or from the command prompt, browse to the directory where SCE is located and type the name of the SCE le.
For example, C:\Users\SystemName\Documents>"<lename>”.
Dell Command |
Congure graphical user interface 19