Release Notes
• Dell Command | Congure allows enabling Secure Boot when Legacy option ROM is enabled and boot mode is UEFI.
• Dell Command | Congure does not allow enumerating Secure Boot when it is disabled.
NOTE: There is no negative impact due to this on the BIOS. This issue will be addressed in the upcoming BIOS versions.
Issue: Blinkpsu1led and Blinkpsu2led missing in the .ini
le or SCE
Description: Blinkpsu1led and Blinkpsu2led will not be present in the .ini le or SCE as they are enable-only tokens and they are active only
for few seconds. These tokens cannot be modied using GUI.
Issue: advsm option displays the status as Other
Description: If any of the fans is not working, the advsm option displays the status as Other.
Issue: Advance Battery Charge and Peak Shift Charge
options display Disable
Description: Platforms that do not support Advance Battery Charge option, when advbatterychargecfg option is enumerated, the system
displays the option as Disable.
Platforms that do not support Peak Shift Charge option, when peakshiftcfg option is enumerated, the system displays the option as
Disable.
Issue: Temperature probe in Advanced System
Management option displays as Unknown
Description: On some platforms that support Advanced System Management option, temperature probe of all the sensors displays as
Unknown.
NOTE
: This issue will be addressed in the upcoming BIOS versions.
Issue: On some of the platforms that support
Advanced System Management option, temperature
probe of Memory sensor 2 displays the current status
as Non-Critical instead of Normal.
NOTE
: This issue is addressed in the upcoming BIOS versions.
10 Known Issues: Command Line Interface