Reference Guide

--TpmSecurity
Valid Argument Enabled, Disabled
Description Turns the Trusted Platform Module (TPM) on or o.
--TpmActivation
Valid Argument Enabled, Disabled
Description Remotely enables the TPM depending on certain security criteria. The disabled option is a read-only
argument for reporting the current activation state of the TPM.
To activate TPM,
• Password must be set
• TPM must not be owned
• TPM must be disabled
For more information, see Dell Command | Congure User’s Guide at dell.com/
dellclientcommandsuitemanuals.
For more information, see Dell Command | Congure User’s Guide.
--TpmClear
Valid Argument
Enabled, Disabled
Description When you enable TpmClear, TPM ownership is cleared at the next boot, and the system rmware sets
the value of TpmClear to disabled. When you disable TpmClear, TPM ownership remains unchanged.
NOTE:
Admin password is required to enable or disable this feature using Dell Command | Congure.
--TpmPpiAcpi
Valid Argument
Enabled, Disabled
Description Enables or disables the Physical Presence Interface (PPI) commands for TPM ACPI.
--TpmPpiClearOverride
Valid Argument
Enabled, Disabled
Description
When enabled, tpmppiclearoverride, performing the TPM clear command within operating system does
not require user's interaction. When disabled, performing the TPM clear command within operating
system requires user's interaction.
Dell Command | Congure options 95