Reference Guide

--SysFanSpeed
Valid Argument FullSpeed, NoiseReduce
Description
Sets the system fan speed.
• FullSpeed — Sets the speed for normal cooling.
• NoiseReduce — Sets the speed to slow to reduce noise.
--SysId
Valid Argument Read-only
Description Displays the Dell System’s ID byte for systems that support it. The value of this feature is -1 if the
system does not support it.
--SysLogoOnIrst
Valid Argument Enabled, Disabled
Description
Enables or disables displaying the system logo from cache, during system resume using Intel Rapid Start
Technology.
• Enabled — Enables displaying the system logo from cache, during system resume using Intel Rapid
Start Technology.
• Disabled — Disables displaying the system logo from cache, during system resume using Intel
Rapid Start Technology.
--SysName
Valid Argument
Read-only
Description Displays name of the system.
--SysPwd
Valid Argument
<password>
Description Sets the system password. An argument is required. The password cannot be reported. Initially you can
set the password using Dell Command | Congure. If you want to remove the password, provide one
blank space and the old password.
Example
NOTE: Password containing special characters must be provided in double inverted commas
(“”).
To set the password:
C:\>cctk --SysPwd=<new-password>
92 Dell Command | Congure options