Reference Guide

--InternalSpeaker
Valid Argument Enabled, Disabled, Low, Medium, High
Description
Turns the built-in speakers on or o.
• Enabled — turns on the built-in speaker. The speaker is enabled at the single system-supported
volume.
NOTE: This should be used only if low/medium/high attributes are not supported by the
system.
• Disabled — turns o the built-in speaker.
• Low — Sets the volume of the built-in speaker to low.
• Medium — Sets the volume of the built-in speakers to medium.
• High — Sets the volume of the built-in speakers to high.
--SpeakersStealthMode
Valid Argument Unchanged, TurnO
Description
Congures the state of the onboard speakers depending on the Stealth mode is enabled or disabled.
• TurnO — Turns o the onboard speakers if the stealth mode is enabled.
• Unchanged — Retains the current state of the onboard speakers.
--Speedstep
Valid Argument
Enabled, Disabled, MaxPerformance, MaxBattery
Description Sets the speedstep status to Enabled, Disabled, MaxPerformance, or MaxBattery.
--SpeedShift
Valid Argument
Enabled, Disabled
Description
Enables or disables the Intel Speed Shift Technology support. Setting this option to Enabled allows the
operating system to select the appropriate processor performance automatically.
--SplashScreen
Valid Argument
Enabled, Disabled
Description Enables or disables the display of the splash or summary screen, rather than the detail of the POST
ow.
Dell Command | Congure options 89