Reference Guide

--Serial5
Valid Argument Disabled, Auto
Description Congures the 5th serial port of the system.
--Serial6
Valid Argument Disabled, Auto
Description Congures the 6th serial port of the system.
--SerialComm
Valid Argument O, On, Com1Cr, Com2Cr
Description
Sets the behavior of the serial port communication.
• O — Disables the COM port 1 and COM port 2.
• On — Enables the COM port 1 and COM port 2. These ports are made available for use by the
operating system or applications. BIOS Console Redirection is disabled.
• Com1Cr — Enables the COM port 1 and COM port 2. These ports are made available for use by
the operating system or applications. BIOS Console Redirection is through COM port 1.
• Com2Cr — Enables the COM port 1 and COM port 2. These ports are made available for use by
the operating system or applications. BIOS Console Redirection is through COM port 2.
--Serr
Valid Argument
Enabled, Disabled
Description Turns the serr Dmi messages on or o.
--SetupPwd
Valid Argument
<password>
Description Sets the setup password. An argument is required. The password cannot be displayed. Initially you can
set the password. If you want to remove the password, provide one blank space and the old password.
Example
NOTE: Password containing special characters must be provided in double inverted commas
(“”).
To set the password:
C:\>cctk --SetupPwd=<new-password>
To change the password:
C:\>cctk --SetupPwd=<old-password> --ValSetupPwd=<new-password>
Dell Command | Congure options 85