Reference Guide

--PpiBypassForBlockSid
Valid Argument Enabled, Disabled
Description
When there is no drive ownership and the ppibypassforblocksid is enabled, BIOS requires user input
while sending the Block SID authentication command to SED drives. When ppibypassforblocksid is
disabled, BIOS does not require user input while sending the Block SID command.
--PrimaryBattChargeCfg
Valid Argument Standard, Express, PrimAcUse, Adaptive, Custom
Description Congures the primary battery charging.
• Standard — Charges the battery over a longer period of time.
• Express — Charges the battery using the express charging algorithm, Dell's fast charging
technology.
• PrimAcUse — Charges battery while plugged-in.
• Adaptive — Charges the battery based on a periodic evaluation of battery usage to deliver the best
balance capacity.
• Custom — The battery charging starts and stops based on user input. The start value range should
be 50-95 percent, the stop value range should be 55-100 percent, and the dierence between the
start and stop values should be greater than or equal to 5.
Example
C:\>cctk --PrimaryBattChargeCfg=Standard
PrimaryBattChargeCfg=Standard
C:\>cctk --PrimaryBattChargeCfg=Custom:50-70
PrimaryBattChargeCfg=Custom:50-70
NOTE: The format to set custom option is custom:start value-stop value. The
start value range must be 50–95 percentage and the stop value range must be 55–100
percentage. The dierence between the start and stop values must be greater than or equal
to 5.
--PrimaryVideoSlot
Valid Argument
Auto, Slot0, Slot1, Slot2, Slot3, Slot4, Slot5, Slot6, Slot7, Slot8, Slot9, Slot10, Slot11, Slot12, Slot13,
Slot14, Slot15Onboard
Description
Conguring the slot for Primary video display.
• Onboard — Sets the onboard video device slot as primary video device slot.
• Auto — Scans PCI buses and uses the rst video device slot found with video card as a primary
video device slot.
• Slot0-Slot15 — Sets the specied slot number as a primary video device slot.
NOTE: If a video card is not available in the specied slot number, the system will scan the
PCI buses and uses the rst video device slot found with video card as a primary video
device.
Example
C:\>cctk --PrimaryVideoSlot=Auto
PrimaryVideoSlot=Auto
78 Dell Command | Congure options