Reference Guide

--PeakShiftBatteryThreshold
Valid Argument integers ranging from 15 to 100
Description
Sets the value of Peak Shift battery threshold. When the Peak Shift battery threshold level is reached,
the system starts using AC power. Setting the value to 00 percent allows the system to use power only
from the battery during Peak Shift duration (Peak Shift Start time and Peak shift End time).
Example
C:\>cctk --PeakShiftBatteryThreshold=50
PeakShiftBatteryThreshold=50
--PeakShiftCfg
Valid Argument Enabled, Disabled
Description
Enables or disables Peak Shift battery conguration. Using Peak Shift conguration, you can minimize
the consumption of AC power during the peak power usage period of the day with the enable and
disable options. You can set a start and end time for the Peak Shift period. During this period, the
system runs on battery if the battery charge is above the set battery threshold value. After the Peak
Shift period, the system runs on AC power without charging the battery. The system functions normally
using AC power and recharging the battery after the specied Charge Start Time.
NOTE: To use PeakShiftCfg, set the values of Operate only on battery, Operate
only on AC, and Resume normal power/charge. The values must be set in such a
way that Peak shift start time <= Peak shift end time <= Peak shift charge start time.
NOTE: The value of hour must be in the range 00–23 and minute must be 00,15, 30, or 45.
To set 12 a.m., provide the hour value as 00.
Example
To enable Peak Shift battery conguration:
C:\>cctk --PeakShiftCfg=Enabled
PeakShiftCfg=Enabled
To enable Peak Shift battery conguration on specic days for a specic period:
C:\>cctk --
PeakShiftCfg=Enabled,mon-10:30/14:00/16:00,tue-10:30/14:00/16:30
To disable Peak Shift battery conguration:
C:\>cctk --PeakShiftCfg=Disabled
PeakShiftCfg=Disabled
--PenMisIndication
Valid Argument
Enabled, Disabled
Description Enables or disables the missing pen indication. This controls tablet PC pen removal. The pen LED blinks
to indicate that the pen has been removed from the retaining well.
Dell Command | Congure options 75