Reference Guide

Table Of Contents
--EmbIdeRaid2
Valid Argument Enabled, Disabled
Description
Enables or disables the second embeded IDE RAID controller.
--EmbNic1
Valid Argument EnabledPxe, Enabled, Disabled, OnWithIscsi, OnWithRplBoot, OnWithImageServerBoot
Description
Denes the state of the built-in NIC.
NOTE: Onwithimageserverboot is used in the deployment of Dell SmartClient products.
--EmbNic2
Valid Argument EnabledPxe, Enabled, Disabled, OnWithIscsi, OnWithRplBoot, OnWithImageServerBoot
Description Enables or disables the second embedded NIC.
--EmbSataRaid
Valid Argument
Disabled, Combined, Ata, Ahci, Raid, Qdma, SmartResponse
Description Congures the embedded Serial ATA (SATA) RAID controller.
--EmbScsi1
Valid Argument
Enabled, Disabled
Description Enables or disables the rst Small Computer System Interface (SCSI) controller.
--EmbScsi2
Valid Argument
Enabled, Disabled
Description Enables or disables the second SCSI controller.
--SdCard
Valid Argument
Enabled, Disabled
Description Enables or disables the embedded Secure Digital (SD) card.
Dell Command | Congure options 47