Reference Guide

--CStatesCtrl
Valid Argument Enabled, Disabled
Description
Enables or disables the C states.
• Enabled — Processor can operate in all available Power C states.
• Disabled — No C states available for the processor.
--DashSupport
Valid Argument Enabled, Disabled
Description
Enables and disables the support for Desktop and Mobile Architecture for System Hardware (DASH)
management through Platform Level Data Model (PLDM) exchanges.
--Dbpm
Valid Argument
Enabled, Disabled
Description
Enables or disables demand-based power management.
--Dbs
Valid Argument
Enabled, Disabled
Description
Enables or disables demand-based power management.
--Decrypt
Valid Argument
Read-only
Description
--DeepSleepCtrl
Valid Argument
S5Only, S4AndS5, Disabled
Description Congures the system power mode when the system is in s4 and s5 state. If set to S5Only, the system
moves to the lowest-power o mode when in s5 state. If set to S4AndS5 state, the system moves to
the lowest-power o mode when in s4 and s5 states. When the system is in a low-power mode, it turns
o most of the power-consuming circuitry devices, to meet the 1 W power limit. It disables the Power
Management Event (PME), USB power, and so on.
44 Dell Command | Congure options