Reference Guide

--ChassisIntruStatus
Valid Argument DoorOpen, Tripped, DoorClosed, TripReset
Description
Displays the status of chassis intrusion. All the values are read-only except tripreset.
• DoorOpen — Indicates chassis door is opened.
• Tripped — Indicates the chassis door is opened since the last time the sensor detection logic was
reset.
• DoorClosed — Indicates chassis door is closed.
• TripReset — Resets the sensor detection logic to detect the next closed-to-open transition on the
chassis door.
--ClearDellRmtLog
Valid Argument Enabled, Disabled
Description
--CmosDefaults
Valid Argument
Enabled, Disabled
Description Enables or disables the request for a default of CMOS values when the system reboots.
--CompletionCode
Valid Argument
Read-only
Description Displays the completion code of an update operation performed by BIOS in the recent shutdown or
reboot operation. For more information, see Completion Code.
--Computrace
Valid Argument
Activate, Disabled
Description This feature allows the user to enable or disable Absolute Software's Computrace security software
BIOS ROM. After this token is written, the state is permanently maintained (this is a write-once eld).
NOTE:
You cannot enable or disable this feature using Dell Command | Congure.
Dell Command | Congure options 41