Reference Guide

--BlinkPsu1Led
Valid Argument Enabled
Description
Sets the rst Power Supply (PSU 1) status LED to blink. Enabling the LED to blink helps to recognize
the power supply probe in use while using ASM feature. For more details, see Advanced System
Management.
NOTE: This option is supported only on systems that support ASM.
--BlinkPsu2Led
Valid Argument Enabled
Description
Sets the second Power Supply (PSU 2) status LED to blink. Enabling the LED to blink helps to
recognize the power supply probe in use while using ASM feature. For more details, see Advanced
System Management.
NOTE: This option is supported only on systems that support ASM.
--BlockSleep
Valid Argument
Enabled, Disabled
Description
Enables or disables the Block S3 sleep state. When enabled, the system BIOS blocks all OSPM/ACPI
S3 (Suspend to RAM) requests and enforces the preboot authentication on all non-S3 resumes. When
disabled, the system BIOS allows all Operating System-directed conguration and Power Management
(OSPM) or Advanced Conguration and Power Interface (ACPI) S3 suspend to Random Access
Memory (RAM) operation. This moves the system authentication to the operating system and prevents
any preboot authentication on resume.
--BlockSid
Valid Argument
Enabled, Disabled
Description
When there is no drive ownership and the blocksid is enabled, BIOS sends the Block SID authentication
command to SED drives. When disabled, BIOS does not send the Block SID command.
--BltInPntDevice
Valid Argument
Enabled, Disabled
Description Enables or disables built-in pointing device.
36 Dell Command | Congure options