Reference Guide

--BiosAutoRcvr
Valid Argument Enabled, Disabled
Description
Enables or disables BIOS auto recovery feature.
• Enabled — If BIOS corruption is detected, the system automatically recovers BIOS without any
user interaction.
• Disabled — Disables BIOS auto recovery feature.
NOTE: This feature is eective only if the biosrecovery option is enabled.
--BiosCharacteristics
Valid Argument Read-only
Description
Displays the features supported by the specic version of the BIOS. This contains bit-ags which dene
support attributes for the BIOS and the system. The rst 32-bits are from the reference specication
available on the Distributed Management Task Force at dmtf.org. These must be set only if the system
supports the following features: Industry Standard Architecture (ISA), Extended Industry Standard
Architecture (EISA), PCI, Personal Computer Memory Card International Association (PC Card/
PCMCIA), PnP, Advanced power management (APM), Upgradeable BIOS, BIOS Shadowing allowed,
Video Electronics Standards Association (VL VESA), Extended System Conguration Data (ESCD).
• 32 to 47 are always set to 0 by Dell-developed BIOS.
• 48 sets to 1 if the built-in NIC supports MagicPacket.
• 49 sets to 1 if the system supports Wake-on-LAN.
• 50 sets to 1 if the system supports chassis intrusion.
• 51 sets to 1 if the built-in NIC supports pattern-matching.
• 52 sets to 1 if the system BIOS supports a seven character service tag.
• 53 to 63 are reserved for future assignments.
--BIOSConnect
Valid Argument
Enabled, Disabled
Description
Enables or disables BIOS Connect feature.
--BIOSEnumMode
Valid Argument
BIOSAssistEnum and NativeEnum
Description
Thunderbolt PCIe Enumeration Mode controls when OS or BIOS performs the enumeration of
Thunderbolt PCIe devices.
Dell Command | Congure options 33