Reference Guide

Code Description
0004h Flash programming is currently disabled on the system, or the voltage is low.
0005h A battery must be installed for the operation to complete.
0006h A fully-charged battery must be present for the operation to complete.
0007h An external power adapter must be connected for the operation to complete.
0008h The 12V required to program the ash-memory could not be set.
0009h The 12V required to program the ash-memory could not be removed.
000Ah A ash-memory failure occurred during a block-erase operation.
000Bh A general failure occurred during the ash programming.
000Ch A data miscompare error occurred during the ash programming.
000Dh The image could not be found in memory or the header could not be located.
000Eh Reserved for future assignment via this specication.
FFFFh No update operation has been performed on the system.
Dell Command | Congure options 117