Release Notes

Issue: advsm option displays the status as Other

Description: If any of the fans is not working, the advsm option displays the status as Other.

Issue: Advance Battery Charge and Peak Shift Charge options display

Disable

Description: Platforms that do not support Advance Battery Charge option, when advbatterychargecfg option is enumerated, the

system displays the option as Disable.

Platforms that do not support Peak Shift Charge option, when peakshiftcfg option is enumerated, the system displays the option

as Disable.

Issue: Temperature probe in Advanced System Management option

displays as Unknown

Description: On some platforms that support Advanced System Management option, temperature probe of all the sensors displays

as Unknown.

NOTE: This issue will be addressed in the upcoming BIOS versions.

Issue: On some of the platforms that support Advanced System

Management option, temperature probe of Memory sensor 2 displays

the current status as Non-Critical instead of Normal.

NOTE: This issue is addressed in the upcoming BIOS versions.

Issue: On some of the platforms that support Advanced System

Management option, when you set non-critical upper threshold values

for cooling device, the CLI indicates that the action failed; however,

setting the same is successful.

Issue: Unable to congure ASM (advsm) BIOS options in .ini le/SCE

Description: While conguring ASM (advsm) option using .ini le, or SCE, Setup password or System password should not be set or

modied.

Issue: Dell Command | Congure sets an unknown password for the

BIOS

Description: : While running the following command cctk.exe --setuppwd --valsetuppwd=abcd1234, Dell Command |

Congure displays Only validation option. No actions will be performed. Password is set successfully message.

NOTE: This issue is addressed in the upcoming BIOS versions.