Reference Guide

For example, to set the non-critical threshold values for a cooling probe on a system with a setup password, type:

cctk advsm --set=cd_1:55 --valsetuppwd = <setup password>

For example, to set the non-critical threshold values for a temperature probe on a system with a setup password, type:

cctk advsm --set=temperature_1:55 --valsetuppwd = <setup password>

If the system has a system password and no setup password, while setting the non-critical threshold values specify the system

password and set the non-critical threshold values as:

cctk advsm --set=<cctk option name>:<upper non critical threshold value> --valsyspwd=

For example, to set the non-critical threshold values for a voltage probe on a system with a system password and no setup

password, type:

cctk advsm --set=voltage_1:10 --valsyspwd = <system password>

For example, to set the non-critical threshold values for a current probe on a system with a system password and no setup

password, type:

cctk advsm --set=current_1:10 --valsyspwd = <system password>

For example, to set the non-critical threshold values for a cooling probe on a system with a system password and no setup

password, type:

cctk advsm --set=cd_1:10 --valsyspwd = <system password>

For example, to set the non-critical threshold values for a temperature probe on a system with a system password and no setup

password, type:

cctk advsm --set=temperature_1:10 --valsyspwd = <system password>

PCI reporting

The scan of the PCI bus will use a le to resolve PCI vendor and device codes to vendor information strings. The format of the PCI

output is as follows:

PCI Bus: 2, Device: 4, Function: 0

Vendor: 8086 - Intel Corp.

Device: 1229 - 82557/8/9 [Ethernet Pro 100]

Sub Vendor:8086 - Intel Corp.

Sub Device:1017 - EtherExpress PRO/100+ Dual Port Server Adapter

Slot: 01

Class: 02 - Network

SubClass: 00 - Ethernet

If the le for vendor resolution is not present, the utility will print Unknown next to a vendor name. If the le for environment variable

names is not present, the utility will fail the environment variable operation.

The pci.ids le is located at :

• Systems running on supported Windows operating system:

– For 32-bit systems; C:\Program Files\Dell\Command Congure\X86

– For 64-bit systems; C:\Program Files\Dell\Command Congure\X86_64

• Systems running on supported Linux operating system: /opt/dell/dcc

Completion code

The following table displays the completion code of an update operation performed by BIOS in the recent shutdown or reboot

operation.