Reference Guide
--warningsanderrors
Valid Argument disable, contonwarn, contonwarnanderrors
Description During POST the system continues to boot or pauses when warnings or errors are detected. This
feature can be used for the remotely managed systems that do not have a keyboard or a console
for the user to respond.
• disable — System pauses for the user to respond when warnings or errors are detected.
• contonwarn — System continues to boot when warnings are detected, but pauses for the
user to respond when errors are detected.
• contonwarnanderrors — System continues to boot when warnings or errors are detected.
NOTE: Errors deemed critical to the operation of the system hardware will always halt
the system.
Example
C:\>cctk --warningsanderrors=disable
warningsanderrors=disable
--watchdogtimer
Valid Argument enable, disable
Description Enables or disables the system to reboot or reset when the watchdog time expires.
--wicatcherchanges
Valid Argument
permit, deny
Description Permits or denies Wi-Fi catcher changes. If the administrator password is not set, this setting will
have no eect.
--wilocator
Valid Argument
enable, disable
Description Enables or disables the Wi-Fi locator. When enabled, the locator feature can be activated during
S3 to indicate the presence and intensity of wireless network(s), without fully waking the system.
--wigigradiostealthmode
Valid Argument
turno, unchanged
Description
Congures or displays the state of Wireless Gigabit Alliance (WiGig) radio depending on the
Unobtrusive mode or stealth mode is enabled or disabled.
• turno — Turns o the WiGig radio if the Unobtrusive mode or stealth mode is enabled.
• unchanged — Retains the current state of the Wigig radio.
--wirelessadapter
Valid Argument
enable, disable
Description Enables or disables the wireless adapter.
94