Reference Guide
--vmdnvmepcie1cpu1
Valid Argument enable, disable
Description
Enables or disables the VMD for Front NVMe Port (PCIE1-CPU1).
--vmdpcieslot
Valid Argument enable, disable
Description
Enables or disables the VMD for PCIe Slot.
--wakeondock
Valid Argument enable, disable
Description Enables or disables waking the system when a docking connection is made.
--wakeonlan
Valid Argument enable, disable, addincard, onboard, enablewakeonwlan, lanorwlan, lanwithpxeboot, sfp, lanorsfp,
sfpwithpxeboot
Description
Denes the wake-on-LAN feature.
• enable — The system wake-on-LAN feature is enabled; either an onboard or an add-in NIC
can wake the system up.
• disable — The system does not respond to magic packets or other means of wake-on-LAN.
The NIC chip section that looks for packets will not be powered.
• addincard — Enables NICs, plugged into the special power connector, as the source of any
wake-on-LAN signal.
• onboard — The onboard NIC is enabled for wake-on-LAN.
• enablewakeonwlan — Enables wake-on-LAN for wireless.
• lanorwlan — On systems that have onboard LAN and wireless LAN hardware, enables wake
on either wired or wireless LAN.
• lanwithpxeboot — Enables the network controller and causes the system to wake up and
immediately boot to PXE when a wake packet is sent to the system in the S4 or S5 state.
• sfp — Allows the system to wake-up by special SFP signals.
• lanorsfp — Allows the system to wake-up either by LAN, or by SFP signals.
• sfpwithpxeboot — Allows the system to wake-up by SFP singnals, and immediately boot to
PXE.
Example
C:\>cctk --wakeonlan=lanwithpxeboot
wakeonlan=lanwithpxeboot
--wakeonlanbootovrd
Valid Argument
enable, disable
Description
Enables or disables the wake on LAN boot override feature.
• enable — When the system powers on due to a wake-on-LAN event, the NIC boot-ROM is
automatically given the highest boot priority, pre-pending the PXE boot-ROM to the system
current boot sequence. If the system powers on due to some other event, this selection does
not inuence the boot sequence.
• disable — Disables the boot override feature and the system boot sequence is in eect for all
types of system power on.
93