Reference Guide
--usbwakefroms4
Valid Argument enable, disable
Description
Enables or disables the USB wake from s4 power state of the system.
• enable - Enables the USB wake from s4 power state of the system.
• disable - Disables the USB wake from s4 power state of the system.
--uuid
Valid Argument Read-only
Description Reports the Universally Unique Identier (UUID) for a system. The UUID is a unique system
identier used in PXE requests.
--vaconglock
Valid Argument unlock, lock
Description Sets the Intel Virtual Appliance Conguration lock.
--valsetuppwd
Valid Argument
<password>
Description Validates the setup password while setting a value in the BIOS. This is applicable only if you set a
setup password or both setup password and system password.
--valsyspwd
Valid Argument
<password>
Description Validates the system password while setting a value in the BIOS. This is applicable only if you set a
system password and did not set a setup password.
--vaphysicalpresenceconrm
Valid Argument
on, o
Description Sets the VA Physical Presence Conrmation. If set to o, it will allow VA install application to make
virtual appliance conguration changes without rebooting. If set to on, it forces VA install
application to reboot the system to make virtual appliance conguration.
--vgadacsnoop
Valid Argument
enable, disable
Description Enables or disables the Video Graphics Array (VGA) Digital-to-Analog Converter (DAC) Snoop in
BIOS.
91