Reference Guide

--secureguardext
Valid Argument enable, disable, softcontrolled
Description Congures Secure Guard Extensions (SGX) feature. You can select enable or softcontrolled if this
option is disabled.
CAUTION: Using the Dell Command | Congure, you cannot do the following:
• Disable this feature if the current state is enable or softcontrolled
• Enable this feature if the current state is softcontrolled
• Change this feature to softcontrolled if the current state is enable
NOTE: One of the methods of conguring this feature is from the BIOS setup screen.
--serial1
Valid Argument disable, auto, com1, com2, com3, com4, com1_bmc, bmcserial, bmclan, rac, RS232, RS422, RS485
Description Denes the 1st serial port conguration.
--serial2
Valid Argument disable, auto, com2, com4, RS232, RS422, RS485
Description Denes the 2nd serial port conguration.
--serial3
Valid Argument
disable, auto, RS232, RS422, RS485
Description Congures the 3rd serial port of the system.
--serial4
Valid Argument
disable, auto, RS232, RS422, RS485
Description Congures the 4th serial port of the system
--serial5
Valid Argument
disable, auto
Description Congures the 5th serial port of the system.
--serial6
Valid Argument
disable, auto
Description Congures the 6th serial port of the system.
--serialcomm
Valid Argument
o, on, com1cr, com2cr
Description
Sets the behavior of the serial port communication.
• o — Disables the COM port 1 and COM port 2.
75