Reference Guide
• ecp — Enables the built-in parallel port of the system to operate in Extended Capability Port
(ECP) mode, no DMA channel assigned.
• epp — Enables the built-in parallel port to operate in Enhanced Parallel Port (EPP) mode.
• ecpdma1 — Enables the system’s built-in parallel port of the system to operate in ECP mode
DMA channel 1.
• ecpdma3 — Enables the built-in parallel port of the system to operate in ECP mode DMA
channel 3.
Example
C:\>cctk --lptmode=at
lptmode=at
--m2pciessd0
Valid Argument enable, disable
Description Enables or disables M2 PCIE SSD 0.
--m2pciessd1
Valid Argument enable, disable
Description Enables or disables M2 PCIE SSD 1.
--macaddrpassthru
Valid Argument
systemunique, integratednic1, disabled
Description This feature replaces the external NIC MAC address (in a supported dock or dongle) with the
selected MAC address from the system. The default value is the System Unique MAC Address.
--masterpwdlockout
Valid Argument
enable, disable
Description
Enables or disables the master password settings.
CAUTION: Using the Dell Command | Congure, you cannot disable this feature.
• enable — The master password cannot be used to
– clear other passwords
– unlock and access hard disk drive
– erase data from hard disk drive
• disable — The master password can be used to
– clear other passwords
– unlock and access hard disk drive
– erase data from hard disk drive
NOTE: One of the methods of conguring Master Password Lockout feature is from the
BIOS setup screen.
--mediacard
Valid Argument
enable, disable
Description Enables or disables the media card.
58