Reference Guide

--forcepxe
Valid Argument enable, disable
Description
Enables or disables Preboot Execution Environment (PXE) as the rst boot device on all
subsequent boots.
--forcepxeonnextboot
Valid Argument enable, disable
Description
Enables or disables Force PXE on next boot in BIOS.
If enabled, when the BIOS boots next time, the rst PXE-capable device is inserted as the rst
device in the boot sequence. Enabling this value causes this operation on the next boot only, and
does not cause a change in the dened boot sequence of the system. The BIOS chooses the rst
PXE-capable device as the onboard network controller of the system, if present and enabled, or
the rst bootable network device found in the standard PCI search order of the system-
whichever comes rst.
If disabled, the boot override feature is disabled and the system boot sequence is in eect.
--frontpanelerrdisplaymode
Valid Argument
aller, rsterr
Description Congures to report all the errors or only the rst error on the front panel Liquid Crystal Display
(LCD).
• aller — All errors displayed on front panel LCD.
• rsterr — Only rst error displayed on front panel LCD.
--frontusbportcollection
Valid Argument
enable, disable
Description If a USB port is enabled, devices attached to this port are enabled and available for the OS. If a
USB port is disabled, any devices attached to this port are not visible to the OS.
NOTE:
USB, keyboard, and mouse devices work in the BIOS setup irrespective of this setting.
--fsbr
Valid Argument
115200, 57600, 19200, 9600
Description
Console redirection fail safe baud rate (in bps).
--fsboptimize
Valid Argument
o, on
Description Enables or disables high bandwidth Front Side Bus (FSB) application optimizations.
47